Park Tool

Description: • Combines reaming and facing of the head tube to create a perfect fit for most head cup sizes • Includes a 30.0mm reamer and four pilots: 29.8mm, 30.0mm, 33.8mm and 36.8mm Specs:

• Pins fit Park Tool's CT-1, CT-2, CT-3, CT-5 and CT-7 Chain Tools • Made from hardened alloy tool steel • Card of 2

• 9" steel hook • Black vinyl coated for scratch free life • Includes two machine nuts

Description: • Extends the length of the ES-1 Event Stand by eight feet • Includes one height adjustable tripod upright, two 47" support tubes and one connector sleeve Specs:Parking Mount Type: On the floor

• Designed for the casual cyclist, the economical WTK-2 contains the tools needed for basic repairs and adjustments at home or on the road • Includes : tire levers, AWS-9 fold-up hex/screwdriver, emergency tire boots and pre-glued tube patches all housed in a handy...

• Designed to fit Campagnolo® 5.5mm and 6.0mm hex spoke nipples • Forged steel • Precision machined • Nickel plated • Vinyl dipped for comfortable use

• Clamping height can be raised from 6.5” (16cm) to 16.25” (41cm) above the bench surface • Includes 100-3D Micro Adjust Clamp (clamps tubes up to 3”, fully adjustable clamping pressure, narrow 2.7” clamping jaws)

• The HTR-HS contains the handle (#736), threaded shaft (#739), quick release centering cone assembly (#740), and locking nut (#737) from the Park Tool HTR-1 Head Tube Reaming and Facing Set.

• Perfect for ceramic and precision ground bearings in hubs, headsets, and bottom brackets. Also for suspension components, pivots, cables and more. • Provides superior lubrication, adherence and protection to parts under extreme conditions • Highly water resistant • Extreme temperature range: -20F to...

• Press bearings into a wide variety of cartridge bearing-type bicycle hubs • Includes two bearing presses and precision machined aluminum pilots, bushings and spacers • Works with more than 20 different cartridge bearing sizes and multiple axle configurations

• The DT-UK contains the four telescoping axle adapters and other small parts needed to convert an older DT-5 Disc Brake Mount Facing Set into the new DT-5.2 Disc Brake Mount Facing Set.

• Disc brake mount facing set

• Bio ChainBrite is a 100% biodegradable, natural, plant-based degreaser • Specially formulated for use in the CM-5.2 Cyclone Chain Scrubber • Works great as a general bicycle parts degreaser • Won’t harm alloy, plastic or rubber parts

• Forged aluminum side plates • 3, 4, 5 and 8mm hex wrenches • T25 Torx® compatible driver • Combo cross/straight tip screwdriver • CO2 adapter • Key ring holder • 95 grams

• Gauge bar made of heavy gauge, chrome plated steel • Adjusts to fit 20" to 29"+ wheels • Replaceable threaded tip • Upgraded large inner shaft for added strength • Improved clearance and reach to fit more frame/hanger combinations including low clearance thru-axle...

• Removes and installs crank caps on Shimano® Hollowtech II® cranks • Includes built in hook to lift the safety plate, speeding crank removal • Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for...

• Tire inflator for air compressor

• L-shaped, Torx® wrenches • Made from high torque industrial steel • Sizes: T9, T10, T15, T20, T25, T27, T30 & T40

• The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not required • Used in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter

• The #744 is used to ream BB86/92 bottom bracket shells to an inside diameter of 40.98mm • Used in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter