Park Tool

Description: • 0 to 14 Newton meter (0 to 140 inch-pound) range • 3/8" drive • Reads and registers torque values for both left hand and right hand threading • Length: 11.5" (292 mm) Specs: Drive Type: 3/8'' Measurement System: Nm

Description: • 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches • T25 Torx-compatible driver • Philips #2 cross tip & flat head screwdrivers • Chain tool (5 to 12 speed compatible) • Spoke wrenches (equivalent to SW-0 and SW-2) • Presta...

Description: • Compatible with round and bladed spokes 2.3 mm (13 gauge) wide or less • Compatible with J-bend and straight pull spokes Specs:

Description: • Purpose-built wrench designed for compression nuts, nipples and other fittings found on hydraulic brake systems • Five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses • Slim,...

Description: • 150lb holding capacity • Includes work tray (#105) (900119-01) • Base not included (900706) Specs:Misc: With 100-3C clamp, base sold separately, 900706-01Misc: With 100-3D clamp, base sold separately, 900706-01

Description: • The PRS-2.3 series is a professional quality double arm repair stand designed and built to withstand the rigors of everyday shop use. • Includes two 100-3D Micro Adjust Clamps (clamps tubes up to 3”, fully adjustable clamping pressure, narrow 2.7” clamping jaws)...

Description: • Fully adjustable clamp fits 7/8" to 3" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts • Narrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat posts •...

Description: • Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts • Narrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat posts •...

Description: • Sturdy bicycle cleaning brush with a unique angled and contoured shape • Perfect for cleaning cassettes and freewheels as well as tires • Strong ergonomic handle and stiff nylon bristles Specs:

Description: • Dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain • Long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes • Slim contoured end is capable of picking grit and...

Description: • Syringe capacity: 3.5 fl. oz. (100 cc) • Tube dimensions: 120mm (4.75") long x 3.5mm (0.14") diameter Specs:

Description: • 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex • T25 Torx-compatible • #2 Philips cross tip • Bit holder includes empty spaces for 2 extra bits Specs: Multi-Tool Weight: 336g Number of Tools: 8

Description: • Straps install onto any round tube from 12mm to 60mm (0.5” to 2.4”), as well as most irregular and aero-shaped tubing found on bicycles • Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions...

Description: • Compatible with 16'' to 29''+ wheels (ISO/ETRTO rim sizes from 317 to 630+) • Replaceable M10 threaded tip • Low-profile head fits low clearance thru-axle derailleur hangers and Shimano Direct Mount hangers • Length: 16.5” (420mm) • Weight: 22.75 oz. (645g) Specs:

Description: • Professional level slide hammer made specifically for bicycle press fit cartridge bearings • Set of 5 expanding collets, covering most cartridge bearings with ID from 6 to 32mm • Slide hammer is substantial at 960g • Slide hammer shaft extends from 6.5"...

Description: • Professional level kit for installing and removing bearings within bicycle suspension pivots • 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters • OD (mm): 16, 17, 19, 20.6, 21, 22, 22.3, 24, 26, 28,...

Description: • 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup Ods • 8 installation drifts for standalone bearing installation • Organized in a convenient storage case • Full list of compatible bearing inner/outer diameters found on...

Description: • Includes 90 of Park Tool's best shop tools • An impressive, professional set of specialty tools that will outfit a pro bench or dream home bench • Does not include a tool box Specs:Number of Tools: 90

Description: • A great home mechanic kit • Includes more than 15 genuine Park Tool products that can perform dozens of tasks • Includes Park Tool tool box with extra rooms for spare parts and more tools Specs:Number of Tools: 15

Description: • 32'' tall pad prevents damage to bikes accidentally falling into repair stands • Compatible with repair stands with a 2'' diameter or lower post, all generations of PRS-2 and PRS-3 • Easily removed and installed with hook-and-loop material Specs: