Park Tool

Description: • Tool Carrier • Sleek tool holder designed to securely hold the Park Tool MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool • Can be mounted or strapped to most bike frames (hardware not included) Specs:

Description: • Rescue Tool Pod • The RTP-1 combines two ride-saving tools — the MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool — into one ultra-portable package • The included tool holder securely holds both tools without adding excess weight, and can be mounted...

Description: • Wall-Mounted Socket, Bit & Torque Tool Organizer • Keeps your bits, sockets, and other tools well-organized and within reach • 3 rows of moveable bit holders to fit up to 45 tools with 3/8" drive fittings • Precision-cut openings along the back...

Description: • Wall-Mounted Lubricant & Compound Organizer • Keep all your lubricants and compounds in one place and close at hand • The JH-2 features 9 precision-cut openings to fit Park Tool grease, chain lube, assembly compounds, and grease gun • Integrated mounting holes...

Description: • Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: • SRAM® BSA DUB® • Race Face® Cinch® • Rotor® BSA30 • Zipp® Vuma™...

Description: • Longer upright arms to accommodate most wheels commonly found on road, mountain, BMX, and hybrid bicycles • Larger maximum wheel size (29"+ vs. 29") • Wider maximum hub width (200 mm vs. 175 mm) • Increased clearance for rotor discs and tires...

Description: • Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide • Jaw width: 70 mm (2.75") • Height adjustable from 97 to 147 cm (38" to 58") • Base when open forms a triangle of 126 x...

Description: • Thickness: 1.95 mm • Length: 162 mm (6.4") Specs:

Description: • Includes 5 vulcanized rubber plugs (refills available - part #2370K) • Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") • Weight: 79 grams (2.8 oz.) with plugs Specs:

Description: • Washer diameter: 57 mm (2.25") • Rod length: 175 mm (6.9") • Rod threading: M8 x 1.0 • Adapter nut threading: M12 x 1.0 & M15 x 1.0 Specs:

Description: • Precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 36-notch tool fittings. • Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. • Fits 36-notch bottom bracket tool fittings...

Description: • Precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Praxis Works M30 bottom brackets. • Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. •...

Description: • Fits FSA MegaEvo (16 notch 48.5mm OD cup) • Fits Wheels PF30 (16 notch 49.3mm OD cup) Specs:Bottom Bracket Type: 48.5mm/16 notch, 49.3mm/16 notch

Description: • Installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) • Features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement • Conical end points can...

Description: • T10 Torx-compatible wrench • Not intended for high-torque applications • Total length: 3.75" (95 mm) • Shaft length: 1.7" (43 mm) • Weight: 2.22 oz. (63 g) Specs:Tool Size: T10

Description: • T8 Torx-compatible wrench • Not intended for high-torque applications • Total length: 3.75" (95 mm) • Shaft length: 1.7" (43 mm) • Weight: 2.22 oz. (63 g) Specs:Tool Size: T8

Description: • Compatible with post mount and flat mount disc brake mounts • NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon...

Description: • CeramicSpeed T47/86 • Enduro T47 (30mm and DUB spindles) • Enduro BB30/30a TorqTite (30mm and DUB spindles) • Kogel T47 • SRAM T47 DUB • White Industries T47 • White Industries PF30 Thread-Together Specs: Bottom Bracket Type: T47, PF30

Description: • BBInfinite T47 • Chris King ThreadFit T47 • Chris King ThreadFit 30 • Enduro BBRight Torqtite • Hambini T47 • Rotor T47 External 30mm • Rotor BBright, BB30, BB386EVO, and PF30 thread-together Specs: Bottom Bracket Type: T47, PF30

Description: • 0 to 60 Newton meter (0 to 50 foot-pound) range • 3/8" drive • Reads and registers torque values for both left hand and right hand threading • Length: 17.75" (450 mm) Specs: Drive Type: 3/8'' Measurement System: Nm